UT-130I CNC liquid filling machine

  1) The gear pump is drove by magnetic power, the pump head and the motor is connected without shaft. So there’s no need to worry about the burn out of the motor because of the high load of the pump.

2) Pump head and motor is imported from Japan, other components are manufactured in Taiwan, the function is steady and useful life is long.

3) Pumper head is made from 316L stainless steel, acid alkaline, corrosion-resistant.

4)The motor run is adjusted by potentiometer, the degree of accuracy of filling time can be lower to 0.01 second, so that can guarantee the filling accurately, the deviation is under 2%.

5) Filling capacity is from 5ml-3200L volume according to your need.

6) Fully functional, can be operated by hand, intermittent pedal filling, automatic intermittent filling. Intermittent time can be adjusted.

7) Widely applied in various industrious, almost can be used to filling any flow liquid, especially suitable for oil, washing fluid, acid base solution, High corrosion resistance liquid.

Working process
A.turn on the filler
B: set the filing time depend on your bottle volume(adjust by the add button ) and set the filling speed.
C: adjust the waiting time depend on the gap time you need(adjust by the add button )
D: there are two models for the "counter, model one is: when the red light
is on, and the filler will work until the number you have set, that means, if you set 20, the filler will stop after filling 20 times. Model two is: the red light is off, the counter will record the filing times.

E:the decimal point can be moved by press the" " button.
F:setting Use this button can let you set the filing range easily, press this button before filling, and the it will fill when you press that, and then wait the filing. when your bottle is full, then press that button again, then the filling range is been settled and the filler will remember this data and you can use for next filling

Main Purpose

Widely used in cosmetic, drinks, medical, chemical, medical, food industry etc, highly improve production capacity and product quality. Ideal equipment to fill low viscosity liquid oil, perfume, juice, milk, beverage, ink, water in the bottle, jar and can.

Power supply

220V 50/60 Hz

Power

30 W

Filling range

5-3500 ml

Maximum suction range

2 M

Maximum flow

3.2 L/min

Repeat error

±1%

Anti-drip function

Yes                          

Power-off memory function

Yes